BPFCD - 11410, WEAR RESISTANT PUTTY (WR-2) RESIN
- MSDS: BPFCD
- Manufacturer: ITW DEVCON CORP
- Product Name: 11410, WEAR RESISTANT PUTTY (WR-2) RESIN
- National Stock Number: 8030-00-481-9288
Product Identification
Product ID:11410, WEAR RESISTANT PUTTY (WR-2) RESIN
MSDS Date:12/14/1989
FSC:8030
NIIN:00-481-9288
MSDS Number: BPFCD
Responsible Party
DANVERS, MA 01923-3753
US
Emergency Phone: 508-777-1100
Info Phone: 508-777-1100
Cage: EO352
Contractor
Telephone: 508-777-1100
Cage: EO352
Ingredients
PHENOL, 4,4'-ISOPROPYLIDENEDI-, POLYMER W/1-CHLORO-2,
CAS: 25068-38-6
RTECS: SL6475000
Fraction By Weight: 30-60%
Hazards
LD50 LC50 Mixture:LD50:(ORAL,RAT)11.4 G/KG.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES/SKIN:MILD IRRITATION.
CHRONIC: MODERATE SKIN SENSITIZER.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ALLERGY, ECZEMA, SKIN CONDITION.
First Aid
First Aid:EYES:FLUSH W/WATER FOR AT LEAST 15 MINUTES. GET MEDICAL
ATTENTION. SKIN:WASH W/SOAP & WATER. GET MEDICAL ATTENTION IF
IRRITATION DEVELOPS. INHAL:REMOVE TO FRESH AIR. ADMINISTER OXYGEN
IF BREATHING IS DIFFICULT, GET MEDICAL ATTENTION. INGEST:DO NOT
INDUCE VOMITING. ADMINISTER TWO GLASSES OF WATER. GET MEDICAL
ATTENTION.
Fire Fighting
Flash Point Method:PMCC
Flash Point:>400F,>204C
Extinguishing Media:CO2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:PREVENT SKIN & EYE CONTACT. SCRAPE UP &
DISCARD IN SUITABLE CONTAINERS. USE ABSORBENT MATERIAL IF
NECESSARY. WASH SPILL AREA W/INDUSTRIAL CLEANING AGENT. IF SOLVENT
IS USED FOR CLEANING, TAKE PRECAUTI ONS AGAINST FIRE & PERSONAL
OVEREXPOSURE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN A COOL, DRY PLACE. HANDLE
I/A/W POTENTIAL HAZARD OF CURING AGENT USED.
Other Precautions:IF CURED MATL IS SANDED/MACHINED, USE PROPER PRECS.
WEAR ADEQ PROT EQUIP TO PREVENT OVEREXP TO NUISANCE PARTICULATES OF
ALUMINUM OXIDE. SMALL AMTS OF GRAPHITE DUST MAY BE GENERATED.
GRAPHITE DUST HAS BEEN ISSUED TLV-TWA OF 2.5 MG/M3.
Exposure Controls
Respiratory Protection:NONE REQUIRED AT NORMAL HANDLING TEMPERATURES.
USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF
CONCERN .
Ventilation:LOCAL EXHAUST IS RECOMMENDED FOR CONFINED AREAS. GENERAL
VENTILATION IS ADEQUATE FOR NORMAL USE.
Protective Gloves:CHEMICAL RESISTANT RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT.
Work Hygienic Practices:WASH THORO AFTER USING, PARTICULARLY BEFORE
EATING/SMOKING. REMOVE CONTAM CLTHG & PROT GEAR. LAUNDER/CLEAN
(SUPP DATA)
Supplemental Safety and Health
PH:(5% BY WT IN WATER):7. HYGIENE PRACT: BEFORE RE-USE. DESTROY LEATHER
ARTICLES, INCLUDING SHOES THAT CANNOT BE DECONTAMINATED.
Chemical Properties
HCC:N1
Vapor Pres:NIL @ 78F
Vapor Density:>1
Spec Gravity:2.1
pH:SUPDAT
Solubility in Water:NIL
Appearance and Odor:DARK GRAY PASTE W/LOW ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS & STRONG ACIDS.
Stability Condition to Avoid:OPEN FLAME & EXCESSIVE HEAT.
Hazardous Decomposition Products:COX, ALDEHYDES & ACIDS FROM INCOMPLETE
COMBUSTION.
Conditions to Avoid Polymerization:HEAT IS GENERATED WHEN MIXED W/EPOXY
HARDENER. USE CAUTION WHEN MIXING LARGE QUANTITIES.
Disposal
Waste Disposal Methods:REMOVE TO A WASTE DISPOSAL FACILITY OPERATING IN
COMPLIANCE W/FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.